(as of Feb 12,2021 10:24:37 UTC – Details)
Organize your fishing gear and save valuable space with the KastKing V15 rod and combo fishing rod holder.
The V15 fishing rod rack is made with durable non-rusting amorphous polymer material, which is chemical and heat resistant. KastKing co-injects a tacky thermoplastic polymer material into the v-grooves which holds your fishing rods securely place and will not damage the finish.
This unique patented design (U.S. Patent No.7,237,685) fishing pole holder allows you to store as many as 15 rods or combos in a very small amount of space, less than 18 inches. The key feature is the tacky polymer v-grooves which can grab and hold any size rod up to 1/2” in diameter. This allows you to stagger the height of the reels in the fishing pole rack thus reducing the amount of wall space used to store rods and combos. Most other brand rod racks only store 6 combos in the same amount of space.
Storing fishing rods or combos in the V15 is simple and easy. Simply push the rod into the appropriate size v-groove until the tacky polymer material grabs the rod. To ensure rods stay securely in place on the V-15 Rod rack, place the rod on the rack with the thicker thread wrapped area of the line guide just above the v-groove. To remove a rod or combo simply grab the rod near the rack and pull straight out.
If you have limited space and need to organize your fishing gear, the great value KastKing V15 rod and combo fishing pole holder is just what you need!
The KastKing V15 rod rack can be installed in just a few minutes with the three screws and drywall anchors included. Mounting holes are 16 inches on center for secure mounting to wall studs.
Easy to Use
Simply push the rod firmly into either the large or small v-grooves until the co-injected polymer material grabs the rod blank. Rods or combs can be adjusted vertically, virtually anywhere along the length of the rod to offset the reel location allowing for storage of up to 15 rods and combos.
A tacky thermoplastic polymer is co-injected into the v-grooves to ensure rods and combos are held securely in the rack without damaging your rods.
Installation step 1
Locate wall studs and loosely install one of the outer screws, be sure the screw hits a stud.
Installation Step 2
Using a level, adjust the loose end of the rod rack until level and then mark the other 2 mounting holes with a pencil.
Installation Step 3
Drill and install the anchor for the center mounting hole.
Step 4 of Installation
Reposition the rod rack to level, install mounting screws, and then tighten all screws.
Super Light and Rust Resistant Aluminum Frame
Non-Slip Golf Grip
Corrosion Resistant 420 Stainless Steel
G4116 German Stainless-Steel Blades
Waterproof/Floating Digital Scale with a non-slip Lip Grip
Extends quickly for use and folds easily for storage in its own case
KEY FEATURES – Store up to 15 fishing rods or fishing rod and reel combos in less than 18” of wall space – Innovative Patented Design (U.S. Patent No.7,237,685) fishing pole holder is easy to use – Easy installation with only 3 screws. Affordable Innovation.
STORE 15 RODS OR COMBOS – The KastKing V15 vertical fishing rod rack can store up to 15 rods or combos in less than 18 inches of horizontal wall space. Most other brands only store 6 combos in the same amount of space. Rods and combos can be mounted virtually anywhere along the length of the rod, permitting reels to be staggered at different heights for minimum storage space.
INNOVATIVE DESIGN – This innovative fishing pole rack is simple and easy to use. Simply push the rod firmly into either the large or small v-grooves until the polymer grip material grabs the rod. For additional stability, hang the rod with the thread wrapped line guides just above the v-groove. The tapered v-grooves can accommodate up to a ½” diameter rod with a reel attached. To remove your combo from the fishing rod rack simply grab the rod near the rod rack and pull straight out.
DURABLE MATERIAL – The KastKing V15 fishing rod holder is molded with tough amorphous polymer material which is resistant to heat, chemicals, and impact. The v-grooves are co-injected with a tacky thermoplastic polymer material to ensure rods and combos are held securely in your rack and doesn’t damage or mar your rods.
SIMPLE INSTALLATION – KastKing V15 fishing pole racks have 3 mounting holes. 2 outside holes are 16” on center for secure installation on standard-spaced wall studs. To install the rack, determine the correct mounting height for your poles, install one of the outer screws into a stud, level the rack and mark mounting holes, install anchor for center mounting hole, re-level rod rack, install and tighten all screws. The KastKing V15 fishing rod rack will organize your fishing gear and save space.